Samba Member
Joined: February 09, 2016
Posts: 105
Location: UK
Posted: Tue Aug 23, 2016 5:53 am Post subject: Re: Steering Position Sensor & now Yaw Rate Sensor | |
Still after a faulty one of these, if anyone is prepared to mail it to seattle. |
');//--> |
Samba Member
Joined: January 11, 2016
Posts: 1287
Location: Bethlehem, PA
Posted: Tue Aug 23, 2016 6:21 am Post subject: Re: Steering Position Sensor & now Yaw Rate Sensor | |||
It's just like a steering angle sensor on a BMW 3 series and 5 series. Same Teves MK60 system, steering angle sensor is mounted about halfway down the steering shaft yet you can't interchange the two. They will plug in but physically won't fit. A friend of mine has a machine shop that builds lots of assembly equipment for the automotive industry. He's even told me that if Honda ever decides to make a common motor mount, he'd lose lots of business. Last time I was there he had a machine to assemble a motor mount for a Civic and one for an Accord. Both mounts looked similar yet were different. |
');//--> |
Samba Member
Joined: April 25, 2018
Posts: 3
Location: Poland
Posted: Wed Apr 25, 2018 12:47 am Post subject: Re: Steering Position Sensor & now Yaw Rate Sensor | |
I found this topic really useful so I've decided to register here and share my resolution of the same problem: 1) I've restored original routes with wires and painted inner circle with Oriflame nail lacquer (stolen from wife ): 2) Bought a paper organizer and cut a circle from it: 3) Finally. I hope this should perform well. Glued to the base with the same lacquer: |
');//--> |
Samba Member
Joined: May 24, 2016
Posts: 603
Location: Central California
Posted: Wed Apr 25, 2018 8:41 am Post subject: Re: Steering Position Sensor & now Yaw Rate Sensor | |
Nice! Thanks for sharing. |
');//--> |
Samba Member
Joined: September 19, 2017
Posts: 25
Location: IL
Posted: Wed Apr 25, 2018 9:46 am Post subject: Re: Steering Position Sensor & now Yaw Rate Sensor | |
Mine is defective so I have been looking for a replacement part ever since. Even have a WTB ad posted in the classified! I shall look into this ! Thanks! I'll report the results, won't get to it for another 2 weeks at least! Gracias |
');//--> |
Samba Member
Joined: April 25, 2018
Posts: 3
Location: Poland
Posted: Tue May 22, 2018 7:53 am Post subject: Re: Steering Position Sensor & now Yaw Rate Sensor | |
My repairing was successful. For those who might be interested in setting the sensor into correct position - here are photos with installed sensor. Steering wheel is heading direct, ODIS shows steering angle to be 0.0 degrees. Here is how it looks from the inside: |
');//--> |
Samba Member
Joined: May 01, 2014
Posts: 393
Location: Canada
Posted: Wed May 23, 2018 11:00 am Post subject: Re: Steering Position Sensor & now Yaw Rate Sensor | |
Awesome work! I'm going to try figure out if I can fix mine now - because these are $500! Thanks for the great pictures! |
');//--> |
Samba Member
Joined: October 13, 2005
Posts: 106
Location: Redondo Beach, CA
Posted: Mon Feb 10, 2020 8:54 pm Post subject: Re: Steering Position Sensor & now Yaw Rate Sensor | |
I contacted Formaldegid since the pics no longer show in this thread. He was kind enough to point me to another site that had his excellent write up. I will give this a try! https://translate.google.com/translate?sl=auto&...2236348%2F |
');//--> |
Samba Member
Joined: January 12, 2024
Posts: 3
Location: Seattle
Posted: Wed Feb 14, 2024 12:56 pm Post subject: Re: Steering Position Sensor & now Yaw Rate Sensor | |
Just want to say the person who figured out this fix had the sensor go bad at about 205,000 miles. I'm at 190,000 and it's gone bad. What a mess. No aftermarket products work. No alternatives. One available on eBay used for over $800 that will go bad as well one day. Anyone else do this fix and have it work? It looks so complicated fixing wiring on a circuit board was not in the VW Eurovan owner job description. |
');//--> |
Samba Member
Joined: April 25, 2018
Posts: 3
Location: Poland
Posted: Fri Feb 23, 2024 1:28 pm Post subject: Re: Steering Position Sensor & now Yaw Rate Sensor | |
But what is wrong with self-repair? I made quite a good description with photos. If you are afraid to do it by yourself then go and find mobile phone service. They should be able to do it. From the technical point of view this kind of job is 5 out of 10. In other words - not so complicated but can be worth 20-50 bucks I think, even in USA |
');//--> |
Samba Member
Joined: March 13, 2018
Posts: 194
Location: Anacortes, WA
Posted: Thu Aug 01, 2024 6:02 pm Post subject: Re: Steering Position Sensor & now Yaw Rate Sensor | |
Formaldegid that is an awesome repair and thanks for sharing (I used the google translate version posted above)! I recently had my steering angle sensor off to fix foam blowing out the dash vents. I treated it like it was made of gold, well more like thin crystal. Has the plastic paper organizer held up? Would you recommend doing this to prevent problems? I also wonder about using a thin flexible cutting board. Sand paper the back and epoxy in place. Doing something like this before there are problems is easy. Once the traces are rubbed off it makes it more challenging, but possible like you demonstrated. |
');//--> |